SepticSitter – Basic Residential System (Ethernet Hub)

Auger ExtensionETC (Standard) Pask Permeameter (no auger)

CAD$1,495.00

This basic kit includes the minimum required components of a SepticSitter system:

  • 1 – Sensor Hub (Gateway)
  • 1 – Sonar liquid level/temperature sensor
  • 1 – Water resistant, low voltage, CAN BUS power/communications cable (15m /49ft long) with dust caps.
  • 1 – Terminating resistor connector, female (installed on most remote sensor in the chain)

Select up to 5 additional sensors (for a maximum of 6 sensors per Hub) and additional 15m and /or 5m cables as required to cover all the different locations you wish to monitor. Cables can be joined end-to-end using the watertight connectors to cover longer distances.

Septic service professionals are invited to apply for our Early Access Program (EAP). Our EAP customers will be treated like royalty and benefit from additional support and insights from Dynamic Monitors’ own “Queen of the Throne”, Kelly Galloway, P.Eng.

 

Kelly Galloway, P.Eng. The "Queen of the Throne"

Working with Kelly is sure to be fun, as well as educational.

Kelly is a civil engineer who has specialized in onsite sewage systems for over 25 years. As an EAP customer, she will share her insights with you on what the data is saying about how the system is operating. If applicable, she will provide suggestions on a potential course of action and remedial measures.

 

For Owners of Residential and Commercial Septic Systems and Onsite Sewage Systems:

The Septic Sitter system must be installed, configured and serviced by a licensed septic system service professional. Have your service provider contact Dynamic Monitors for assistance or to answer any questions. If you do not have a service provider we can assist with finding a qualified professional near you.

In stock (can be backordered)

SKU: DM-SS-SYSTEM-BASIC-KIT Categories: ,

Description

This basic kit includes the minimum required components of a residential SepticSitter system to monitor a septic tank, holding tank, pump tank or one drainfield location:

  • 1 – Ethernet Sensor Hub (Gateway)
  • 1 – Sonar liquid level/temperature sensor
  • 1 – Water resistant, low voltage, CAN BUS power/communications cable (15m /49ft long) with dust caps.
  • 1 – Terminating resistor connector, female (installed on the most remote sensor in the chain)

Select up to 5 additional sensors (for a maximum of 6 sensors per Hub) and additional 15m and /or 5m cables to monitor all the different locations of your septic system. Cables can be joined end-to-end using the watertight connectors to cover longer distances. Maximum allowable distances from the Hub to the most remote sensor apply. Contact us for assistance with multi-sensor installations.

Contact Dynamic Monitors for assistance in locating a licensed septic service provider in your area who can install or retrofit SepticSitter in your new or existing septic system.

Annual subscription fees are as follows:

Ethernet Hub systems:

US$15/month (US$180 per year/Hub) billed annually).

CAD$19/month (CAD$228 per year/Hub) billed annually).

Cellular Hub systems:

US$35/month (US$420 per year/Hub) billed annually).

CAD$45/month (CAD$540 per year/Hub) billed annually).

 

As seen at WWETT, NOWRA and CES! This innovative electronic monitor installs easily in a septic tank, pump tank, cess pool or drainfield inspection port and provides peace of mind by confirming your septic system is working properly. 

Septic professionals contact Dynamic Monitors for more information on the Early Access Program. The number of EAP spots is limited, so apply now and stay ahead of the competition!

Visit SepticSitter.com for more info.

U.S. Patent No. 8100006, Canadian No. 2598215

 

Additional information

Weight 8 lbs
Dimensions 10 × 10 × 10 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products