ETC Comprehensive Pask Permeameter Kit with Auger (Factory Second)

CAD$1,620.00

Our “Factory Second” Comprehensive Pask Permeameter Kit is a great choice if you want to have the most complete kit for testing any soil type from sand to loam to clay. This kit includes both the Standard ETC Pask Permeameter as well as our Slow Soil Pask Permeameter. The high quality, professional AMS 2-piece auger has been specially selected for our kit. All components store conveniently inside the durable carry case.

The Pask Permeameters in these kits have cosmetic or aesthetic issues that do not impact their functionality or accuracy in any way.  The most common issue with the Standard Permeameter is the lower tube has a slight angle from where it is glued into the reducer fitting. Other issues could be surface scratches, or that the glue is a bit messier than our “factory firsts”, or there could be a small bit of glue on the inside of the tube/reservoir. There could also be a small hairline crack in the upper reservoir.

All of these “factory seconds” have been QA/QC tested to be watertight, and none of the aesthetic/cosmetic issues would cause problems with the  performance of the permeameter or the accuracy of the measurements. They come with a standard 2 year warranty for permeameters purchased with a storage/carry case.

If you wish to purchase the “Factory First” version of this kit, please visit this link instead.

The field saturated hydraulic conductivity (Kfs) or permeability of in situ soil and constructed fill materials can be quickly and easily measured “in-place” using the ETC Pask Constant Head Permeameter Kit. Our kit is based on the peer-reviewed, constant head well permeameter (CHWP) single ponded height method, described by Reynolds and Elrick, formerly of the University of Guelph, Canada. The ETC Pask Permeameter is a very convenient, and much less costly alternative to other types of in-situ permeameters such as the Guelph Permeameter®. It is also a much more accurate and faster method of assessing the hydraulic capacity of a soil than the outdated, and often very time consuming, percolation test.

Our permeameter kit works with any soil type from sands to loams and clays, even built-up beds of imported septic fill or compacted clay liners for lagoons and landfills.

They can also be used for the design of stormwater management systems.  Our permeameter was recently recommended by Kimley-Horn (California, USA) for the assessment of large infiltration water quality BMPs to assess the BMP condition.

Check this blog article for a detailed 20 point comparison of the ETC Pask Permeameter to the Guelph Permeameter.

Click here to review a document which summarizes the difference between the Simplified Falling Head Permeameter and the ETC Pask Constant Head Permeameter.

Complies with ASTM D5126Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone.

Note: Permeameters of custom lengths, or well heights are available for an additional charge. Contact us at or 1-888-747-7645 (SOIL) if you have any questions.

Currently unavailable

SKU: DM-COMP-PASK-KIT-AUGER-2ND Categories: , Tags: , , ,

Description

Our “Factory second” Comprehensive ETC  Permeameter Kit provides our most flexible coverage compared to other options and is the most efficient for testing all soil types from sands to loams and heavy clays and soil liners. The high quality, professional AMS 2-piece auger has been specially selected for our kit, and stores conveniently inside the durable, hard-sided carry case.

The field saturated hydraulic conductivity (Kfs) or permeability of soil and septic fill can be quickly and easily measured in place using the ETC Pask Constant Head Permeameter Kit manufactured by Dynamic Monitors, a business unit of Engineering Technologies Canada Ltd. (ETC).

The Pask Permeameter is named after David Pask, a public health engineer formerly with the Nova Scotia Dept. of Environment, who advocated for its use in onsite sewage assessments. It has become very popular in Canada and the USA as a convenient and much less expensive alternative to other constant head permeameters such as the Guelph Permeameter®. The test procedure is based on the constant head well permeameter (CHWP) single ponded height method described by Reynolds (2008) and by Elrick and Reynolds (1986).

ETC has prepared an updated, user-friendly guide which incorporates the research by Reynolds, Elrick and others. An abbreviated version of ETC’s User Guide has been incorporated into the new CSA B65-12 Installation Code for Decentralized Wastewater Systems and also the New Brunswick Department of Health’s Technical Guidelines for On-site Sewage Disposal Systems. 

Check this blog article for a detailed 20 point comparison of the ETC Pask Permeameter to the Guelph Permeameter.

Click here to review a document which summarizes the difference between the Simplified Falling Head Permeameter and the ETC Pask Constant Head Permeameter.

Advantages of the ETC Pask Permeameter Kit:

  • Much more accurate and repeatable method of assessing the soil’s drainage properties than the percolation test.
  • Unlike others, we use clear lightweight, and durable polycarbonate for the upper reservoir, rather than heavy PVC. This makes our permeameter extremely light, minimizing the potential for it to sink into the soil and cause errors.
  • NEW! Our permeameter features a custom designed ABS cap with a secure, stainless steel clip. No more concerns about losing rubber stoppers in the bottom of the well hole!
  • Very fast – a test on most soils can usually be completed in only 15 to 45 minutes.
  • Small amount of water needed, typically 0.5 usgal (2 Liters) per test in medium permeability soils.
  • Very visual; easy for homeowners and clients to see how it works, and whether they have “good” soil or not.
  • High quality, durable soil auger (manufactured in the USA by industry leader AMS Samplers) helps to ensure the well hole is of the proper shape with a flat bottom.
  • Calculations are made easy using ETC’s Quick Field Reference Tables.
  • The well height created by the ETC Constant Head permeameter helps to minimize the impact of errors caused by improper soil characterization (estimation of α*).

Kit includes the following:

  1. ETC Pask Permeameter (Factory second) with custom ABS cap and stainless steel clip
  2. ETC Slow Soils Constant Head Pask Permeameter (Factory second) with custom ABS cap and stainless steel clip
  3. AMS Professional Series, Two-piece, Riverside auger, nominal auger diameter 2 ¾”
  4. Custom twisted wire brush
  5. Water extraction syringe and tubing (for removing excess water from over-filled well holes)
  6. ETC Quick Reference Field Calculation Tables (based on an assumed well hole size of 3 ¼” (8.3cm)
  7. Pask Permeameter User Guide and Quick Field Reference Tables
  8. Hard-sided carry/storage case.

The AMS Professional Series two-piece Riverside soil auger included in the kit is used to prepare the well hole. The shape of the blades are ideally suited to achieve a uniform diameter, flat-bottom well hole, which is assumed in the CHWP theory and calculations. The auger produces an average well hole of 3 ¼” = 8.3cm diameter. These AMS augers have been beefed up from “bit to bail” and are perfect for those who want a strong, durable auger that will stand up to the wear and tear of daily use.  They have a stainless steel cylinder, and carbon steel bail, shaft and removable T-handle, which attaches securely to the shaft with a snapper pin. The auger features heat-treated, 11 gauge, high-carbon steel bits with stronger welds and extra tungsten carbide hard-surfaced edges. These Professional series augers are also reinforced with extra gussets welded at both the top and bottom of the bail. The gussets help prevent the bail from bending or twisting when augering into hard or rocky soils.

Auger dimensions: 125cm (49″) x 43cm (17″) x nominal auger diameter 2 ¾”
Auger weight: Approx. 5 lbs.

Note: Soil or fill containing abundant large gravel, cobbles or boulders may not be feasible to test using this, or any other type of Constant Head Permeameter.

Feel free to contact us if you have any questions or concerns.

All prices are subject to change. Volume discount pricing for multiple kits or components may be available at the discretion of Dynamic Monitors. Contact us for more information.

Order online (preferred), or over the phone. Contact us at or 1-888-747-7645 (SOIL) if you have any questions.

Additional information

Weight 40 lbs
Dimensions 53 × 17 × 7 in
Use to determine:

Field saturated hydraulic conductivity (Kfs) of in situ soil, prepared fill materials and constructed soil liners.

Applicable Permeability Range:

Approximately 0.3mm/day (eg. heavy clay) to 70,000mm/day (eg. coarse sand)

Typical Soil Types:

USDA/CSSC: Clay through to sand., USCS: Sand, silty sand, silt, clay.

Soils with high silt/clay content?

Yes.

Method of testing imported fill materials:

Auger well hole into raised bed or test pad of imported fill of appropriate density.

Method of testing natural (in situ) soil:

Auger well hole into soil stratum to be tested.

Test soil with abundant gravel, cobbles, or boulders?

Generally, no, possible if gravel particles are small.

Theory and calculations based on:

Elrick and Reynolds, (1985, 1992).

Kit components:

ETC Pask Permeameter, AMS (7cm) Riverside (bucket) auger, Wire brush, User guide, Quick reference field calculation tables

Product dimensions:

Permeameter – 1250mm (49.2") x 90mm (3.5") nominal O.D. (upper reservoir), Riverside auger – 1330mm (52.4") long x 383mm (15") wide (at T handle), Wire brush – 580mm (22.8") long

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…